Products

Products

Lineup

For Water Supply

We respond to the needs of multifunctional high performance water supply systems, with wide variety of advanced features, such as earthquake-resistant water supply polyethylene pipe, manufactured from a high performance polyethylene resin.

PVC-U
(φ 13 to φ 300)

SGR-VN Fittings
PVC-U Fittings incorporating
Gripping Ring (φ50 to φ150)

HDPE
(φ 50 to φ 200)

HDPE
(OD20 to OD710)

LLDPE
(φ 13 to φ 50)

For Agricultural Water

We contribute to agriculture with various products for pipe lines and paddy water management systems which enables to reduce usage of water and labor cost.

PVC-U
(φ 40 to φ 600)

Fiber Reinforced
Plastics Fittings
(φ 75 to φ 600)

For Sewage and Drainage

We offer various featured products such as earthquake-resistant sewage pipe and fitting to anti-inundation measures systems to achieve our mission, "Secure our Living Standards."

PVC-U Ribbed Pipes /
Manholes(φ 150 to φ 450)

PP Rainwater Accumulation /
Infiltration Systems

For Buildings

We have a wide variety of features such as sanitation, drainage plumbing systems, and fire extinguishing facilities, to make our living environment comfortable.

PB(φ 10 to φ 100, for hot /
cold water supply)

XPE(φ 10 to φ 20, for hot /
cold water supply)

PVC-C(φ 13 to φ 150,
for hot water supply /
hot water drainage)

Transparent PVC-U fittings
(for water supply)

Color PVC-U(φ 50 to φ 150,
for water drainage)

Recycled PVC (φ 40 to φ 150,
for water drainage, ventilation)

For Power and Communication cable, and Gas Plumbing

We provide power and communication cable protection pipes, and gas plumbing polyethylene pipes, to contribute to establishing energy and communication duct lines carried on to our next generations.

PVC-U Underground Cable
Protection Systems

MDPE (φ 25 to φ 200)
for Gas Plumbing

Pickup Products

PVC-U Pipes and Fittings for Water Supply and Pressure Pipeline

For Water Supply

KC HI-VP Pipes

For water supply:
Products conform to Japanese Industrial Standards JIS K6742.

Impact-resistant PVC-U pipes

KC HI-TS Fittings

For water supply:
Products conform to Japanese Industrial Standards JIS K6743.

Impact-resistant PVC-U fittings

For water supply pipes inside buildings and for piping in cold areas

These products are highly impact resistant even under low temperatures(low outdoor air temperatures) and minimize impact-induced damage during the cold season and when other plumbing work is conducted nearby.

Operating temperature and pressure

Operating temperature
range
Normal temperature
(5 to 35°C)
Operating pressure
(hydrostatic pressure)
0.75MPa

Note that the water-hammer pressure becomes greater as the pipe flow velocity increases.
(Make sure that the pipe flow velocity does not exceed 2 m/sec as a general rule.)

KC Transparent Fittings for Water Supply

The transparent body enables to check the joint condition. It prevents plumbers from forgetting to apply adhesive.

*Note: It may be difficult to insert the pipe all the way to the stopper depending on the type of fitting.
In that case, insert the pipe to the following position: Zero point + Min. 1/3 ℓ.

Available diameters (nominal diameters): 13mm to 50mm

PVC-C Pipes and Fittings for Hot Water Supply

For Hot Water Supply

KC HT Pipes and Fittings

Products conform to Japanese Industrial Standards
JIS K6776/6777.

Thermal-resistant PVC-C pipes and fittings

Lightweight and thermal-resistant pipes suitable
for hot water supply

These pipes are made from polyvinyl chloride and offer high corrosion resistance and excellent workability for hot water supply. Unlike metal pipes, these products eliminate the water quality degradation, electrolytic corrosion and electrical leakage accidents due to rusting or corrosion.

Operating temperature and pressure

●Nominal diameters of 50 and less

Operating temperature and maximum operating pressure for HT pipes (JIS K6776)

Operating temperature
(°C)
5 to 40 41 to 60 61 to 70 71 to 90
Maximum Operating pressure
(MPa)
1.0 0.6 0.4 0.2

●Nominal diameters of 65 and more

Operating temperature and maximum operating pressure for HT pipes
(manufacturer's standards)

Operating
temperature(°C)
5 to 40 41 to 60 61 to 70 71 to 90
Maximum Operating 
pressure (MPa)
1.0 0.4 0.25 0.15

*1. Continuous normal operating temperature: maximum of 85°C for pipes with nominal diameters 50 and less, maximum of 80°C for pipes with nominal diameters 65 and more

*2. Maximum operating pressure: Hydrostatic pressure + Water-hammer pressure

PVC-U Pipes and Fittings for Drain and Vent

For Drain and Vent

KC Transparent DV
and VU-DV Fittings

The transparent body enables to check the joint condition.

●It prevents plumbers from forgetting to apply adhesive and from not inserting the pipe all the way!

KC VP and VU Pipes
KC DV and VU-DV Fittings

VP pipes and VU pipes (Products conform to Japanese Industrial Standards JIS K6741)
DV and VU-DV fittings (Products conform to Japanese Industrial Standards JIS K6739 and Japan PVC Pipe and Fittings Association standards AS38)

PVC-U pipes and fittings

Piping in individual ownership space

PVC-U Mini-Manholes

For Drain and Sewage

KC PVC-U Mini-Manholes

Space saving and speedy installation