Check valves

272 companies | 907 products
{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{#if product.activeRequestButton}}
{{/if}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{#if product.activeRequestButton}}
{{/if}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{productPushLabel}}
{{#if product.newProduct}}
{{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
swing check valve
Isogate® CV

Pressure: 865,000 Pa
DN: 25 mm - 350 mm

The Isogate® CV RF check valve is a single port rubber lined swing check valve for prevention of reverse flow in abrasive and corrosive flowing media. The Isogate® CV ...

ball check valve
Isogate® Autoball™

Temperature: 0 °C - 120 °C
Pressure: 520,000, 1,035,000, 690,000 Pa
DN: 80 mm - 600 mm

... There is also the possibility of running both pumps at once if the system so requires. The Autoball™ AB3 valve is a fully serviceable 3-way check valve for the most arduous slurry duties. ...

automatic check valve
VNR series

Temperature: 0 °C - 80 °C
Pressure: 20 mbar - 25,000 mbar
DN: 5 mm - 25.4 mm

Series VNR unidirectional valves, thanks to their poppet-type construction, can operate at low pressures both when there is a free flow and during retention.

ball check valve
VNV series

DN: 5 mm - 12.7 mm

The check valves Series VNV are mainly used on vacuum gripper systems containing multiple suction pads in order to shut off individual suction pads which are not covered or accidently pulled away from ...

cartridge check valve
C series

Pressure: 3,000 psi - 8,000 psi
DN: 0.187 in - 1 in

... types of miniature check valves are available: Axial Flow Check Valves Side Exit Check Valves Zero Leak Check ...

See the other products
THE LEE COMPANY
shuttle check valve
SH / SV series

Pressure: 3,000, 4,000, 5,000 psi
DN: 0.187 in - 0.5 in

This miniature valve manufactured by Lee comes with 3 ports that are designed to facilitate fluid flow to a common outlet, from one of the two available inlet sources. Because of the reduced size of the valve, ...

See the other products
THE LEE COMPANY
poppet check valve
CSFA / CSRA series

Pressure: 5,000 psi
DN: 0.375 in

... Leak Lee Chek Valve is the latest addi­tion to our field proven, miniature zero leak check valve family. Weighing only 24 grams, the .500 inch diameter zero leak check ...

See the other products
THE LEE COMPANY
poppet check valve
RUF3 series

Temperature: 140 °C
Pressure: 10 bar
DN: 25 mm - 150 mm

The SPX FLOW RUF3 check valve is used at places in production lines where a backflow of product must be prevented. When the pressure is balanced, the valve starts closing by spring force ...

disc check valve
VPN series

DN: 25 mm - 100 mm

The DELTA VPN check valve is used in places at which the reflux of liquids into the pipeline must be prevented. The valve opens through the pressure of the liquid against the spring-loaded ...

disc check valve
SDCV series

DN: 50 mm - 350 mm

Split disc check valve Like the DCV, the Spirax Sarco SDCV provides a compactinstallation. The design of the SDCV resolves the size andpressure drop limitations of other check valve ...

See the other products
Spirax Sarco
swing check valve
WCV series

DN: 125 mm - 500 mm

Swing-type wafer check valve The swing-type wafer check valve (WCV), has the mostcompact and light-weight design of all the check valvetypes making ...

See the other products
Spirax Sarco
ball check valve
LCV series

DN: 15 mm - 100 mm

... the valves within the LCV range also offera replaceable seat arrangement for simple and quickmaintenance. This range is also ideal for low differentialpressure applications. How the lift check valve ...

See the other products
Spirax Sarco
poppet check valve
T50P0004

Temperature: -20 °C - 80 °C
Pressure: -0.9 bar - 16 bar

Non-return Valves ITEM: T50P0004 •Allow free flow in one direction only •Simple reliable design •Low weight •Low cracking pressure •High operating pressure

See the other products
Norgren
poppet check valve
S/522

Temperature: -20 °C - 80 °C
Pressure: 0.3 bar - 16 bar

Heavy Duty Non-Return Valves ITEM: S/522 •Allows free flow in one direction only •Simple reliable design •High operating pressure and temperature •Spares kit available Port size:G1/2

See the other products
Norgren
poppet check valve
C01G20618

Temperature: 0 °C - 60 °C
Pressure: 10 bar

Non-Return Valves ITEM: C01G20618 •High flow performance •Nickel plated brass components provide corrosion and contamination resistance and an extended life •Pre applied thread sealant on all taper threads and recessed ...

See the other products
Norgren
cartridge check valve
GV-2C

Temperature: 0 °C - 110 °C

The GV-2C from Clippard is primarily a dual-way stem valve with a cartridge-type mounting style, an inlet port, and outlet port in its primary design.

See the other products
Clippard
poppet check valve
MCV-1

Temperature: 32 °F - 230 °F
Pressure: 21 bar

Check Valve, #10-32 Ports Notes Not intended for pressure relief. Arrow on valve body indicates direction of flow. Additional Information Air Flow 6.5 scfm @ 50 psig; 11.5 scfm @ 100 ...

See the other products
Clippard
piston check valve
MJCV-1

Temperature: 32 °F - 230 °F
Pressure: 1,000 psi

Check Valve, 1/8 Ports Notes Not intended for pressure relief Additional Information Air Flow 20 scfm @ 50 psig; 36 scfm @ 100 psig; 580 l/min @ 6 bar Force Cracks at approximately 1/2 psig Max PSI 0-300air/0-1000hyd Mount Direct ...

See the other products
Clippard
pneumatic check valve
VBNF

Temperature: -10 °C - 60 °C
Pressure: 0.2 bar - 10 bar
DN: 0.125 in - 0.25 in

Port G1/8, G1/4 Push-in connector 6, 8 mm Flow rate 260 l/min Low height Can be rotated horizontally by 360° when assembled Special features: Minimal height Manually actuated exhaust is possible

screw-in check valve
H, HB

Temperature: -10 °C - 60 °C
Pressure: 0.4 bar - 12 bar
DN: 0.125 in - 0.75 in

... , G1/8, G1/4, G3/8, G1/2, G3/4 Push-in connector: 2, 4, 6, 8, 10, 12 mm Flow rate: 115 ... 2230 l/min Shut-off valve Screw-in

swing check valve
113 TIFQ series

Temperature: 65 °C
Pressure: 16 bar
DN: 40 mm - 300 mm

Check valves, Check valves swing type, Check valves type on nodular cast iron PN 16 (EN-GJS-400-15), Valves for drinking ...

See the other products
Mival
disc check valve
335 series

Temperature: -10 °C - 400 °C
Pressure: 23.8 bar - 40 bar
DN: 15 mm - 250 mm

Check valves, Check valves streamlined flow type, Check valves streamlined flow type on carbon steel PN 40 - ANSI 150 (1.0619) Check ...

See the other products
Mival
disc check valve
377/BR series

Temperature: -10 °C - 300 °C
Pressure: 13, 16 bar
DN: 15 mm - 100 mm

Check valves, Check valves disc type, Check valves disc type on brass PN 16 (CW217N) Check valve ...

See the other products
Mival
cartridge check valve
SB, SQ series

Pressure: 315, 420 bar

... direction. No bypass check valve is therefore required. The flow control valve type SB and SQ is used to control the lowering speed of single-acting consumers. The flow control valve ...

See the other products
HAWE Hydraulik SE
hydraulic check valve
B series

Pressure: 500 bar

Check valves are a type of non-return valve. They block the oil flow in one direction and open in the opposite direction. In the closed state they have zero leakage. The check ...

See the other products
HAWE Hydraulik SE
ball check valve
RK, RB series

Pressure: 700, 500, 420 bar

The check valve type RK and RB can be screwed in. The spring-loaded ball check valve type RK and RB is very robust and insensitive to soiling. The check ...

See the other products
HAWE Hydraulik SE
ball check valve
220110

DN: 30 mm

Valves with ball shutters activate suction, creating vacuum in the cups on which they are applied, only when the load to be held activates the sealing shutter. They are made of an anodised aluminium body, a nylon ball ...

ball check valve
100x1x series

DN: 0.25 in - 2 in

... returning into the pump stator, which would cause considerable damages. Therefore, check valves are mandatory on all vacuum pumps with lubrication that do not have them built-in.

membrane check valve
100xx15, 130x11 series

DN: 0.5, 0.25, 0.375, 1, 0.75 in

These valves have the same features of the previously described check valves, but they are made with anodised aluminium, which makes them particularly light. The seal is guaranteed by ...

dual plate check valve
BDK™

Temperature: -29 °C - 600 °C
DN: 80 mm - 2,000 mm

... steel dual plate check valve are isolation valves, suitable for applications in the power, oil and gas and petrochemical industries. Overview BDK™ cast steel check ...

See the other products
WEIR Oil & Gas
swing check valve
BDK™

Temperature: -29 °C - 650 °C
DN: 50 mm - 600 mm

BDK™ cast steel check valves come in swing check and dual plate options, and are suitable for applications in the power, oil and gas and petrochemical industries. Overview BDK™ ...

See the other products
WEIR Oil & Gas
threaded check valve
SPM®

Pressure: 15,000 psi
DN: 2, 3 in

... flow line. Dart valves are intended for use in services where the fluid media does not contain abrasive materials. For those applications, the SD clapper check valve will provide enhanced ...

See the other products
WEIR Oil & Gas
ball check valve
15 series

Temperature: 350 °C
Pressure: 1,050 bar
DN: 23.8 mm

O-Ring Check Valves Maximator O-Ring Check Valves provide high quality directional flow control and tight shut-off for liquids and gases. Ail Check ...

See the other products
Maximator GmbH
ball check valve
21OC series

Temperature: -20 °C - 200 °C
Pressure: 1,550 bar
DN: 2.7 mm - 14.3 mm

The O-Ring check valves are suitable for applications that require non-leakage sealing. It can be operated within the pressure of 1, 500 bar and is used for stopping the directional liquid and gas flow. ...

See the other products
Maximator GmbH
poppet check valve
21BC series

Temperature: -20 °C - 350 °C
Pressure: 1,550 bar
DN: 2.7 mm - 14.3 mm

The MAXIMATOR ball check valves can be used even with high temperatures. Their shut off liquids and gases up to a maximum pressure of 1,500 bar. All valves have collars and glands. The ...

See the other products
Maximator GmbH
ball check valve
TVR200-S1 series

Temperature: -40 °C - 200 °C
Pressure: 0 bar - 250 bar
DN: 3, 4, 5, 6 mm

WEH® Check Valve TVR200-S1 stainless steel, 0 - 250 bar - Product family The WEH® TVR200 Check valves made of stainless steel are ideal for applications with liquid ...

See the other products
WEH GmbH
ball check valve
TVR300

Temperature: -40 °C - 200 °C
Pressure: 0 bar - 100 bar
DN: 3, 4 mm

... TVR300 Miniature check valves made of stainless steel are ideal for applications with liquid and gaseous media up to max. 100 bar. The possible applications are just as varied as the design and the ...

See the other products
WEH GmbH
ball check valve
WEH® TVR2

Pressure: 1,000 bar
DN: 0.125 in - 3 in

... The check valves are available for inert/flammable gases and for oxygen and come complete with the seals suitable for the relevant medium. All check valves comply with ...

See the other products
WEH GmbH
threaded non-return valve
ULTRA 10

Temperature: -20 °C - 70 °C
Pressure: 0 bar - 16 bar
DN: 0.5 in

... pressure applications. Opening pressure approx. 4 mbar, up to 16 bar, G ½" safety element: non-return valve [NV] every non-return valve 100% tested DIN EN ISO 5175-2 ultra-low opening ...

See the other products
WITT-Gasetechnik
threaded non-return valve
ULTRA 20 / ULTRA 21

Temperature: -20 °C - 70 °C
Pressure: 0 bar - 16 bar
DN: 0.5 in - 1 in

... applications. Opening pressure approx. 4 mbar, up to 16 bar, G / NPT 1", 1/2", 3/4" safety element: non-return valve [NV] every non-return valve 100% tested DIN EN ISO 5175-2 ultra-low ...

See the other products
WITT-Gasetechnik
threaded non-return valve
ULTRA 30

Temperature: -20 °C - 70 °C
Pressure: 0 bar - 16 bar
DN: 1.5 in

... applications. Opening pressure approx. 10 mbar, up to 16 bar, G / NPT 1.1/2" safety element: non-return valve [NV] every non-return valve 100% tested DIN EN ISO 5175-2 ultra-low ...

See the other products
WITT-Gasetechnik
flange check valve
GEMÜ RSK

Temperature: -10 °C - 200 °C

GEMÜ RSK is a plastic check valve. During installation it is clamped between two flanges. - Nominal sizes DN 32 - 600 - Eye bolt as installation aid - Weight and space-saving construction - Simplified ...

throttle check valve
SDM series

Temperature: -20 °C - 80 °C
Pressure: 700 bar

... cartridge valve. Adjustable throttle valves are used for the adjustment of flow rates. The moving speed of a cylinder or motor can be influenced by these valves. Design Cartridge ...

See the other products
Bieri Hydraulik
throttle check valve
SDRVM series

Temperature: -20 °C - 80 °C
Pressure: 500 bar

... adjustable throttle valves SDM and check valves RVM (size G1/4), which are integrated in a valve block. Depending on the closing direction of the check ...

See the other products
Bieri Hydraulik
throttle check valve
SD series

Temperature: -20 °C - 80 °C
Pressure: 700 bar

... customer can be influenced with the valves Throttle valves for inlet and outlet throttling Throttle check valves as screw/in cartridge or intermediate plate valve ...

See the other products
Bieri Hydraulik
threaded check valve
CV series

Temperature: -18 °C - 93 °C
Pressure: 0 bar - 15.9 bar
DN: 0.25 in - 2 in

... industry. ANVER single-phase vacuum check valves provide maximum overall value and can perform in any direction for all types of vacuum requirements. Additionally, these check valves ...

membrane check valve
CKV

Pressure: 0 bar - 17.2 bar
DN: 1.02 mm

... body, duckbill check valve obtains 250 psig optimal pressure rating. It is composed of 6 to 8 grams of brass material, and 303 stainless steel component. Its system allows one-way flow route, and prevents ...

membrane check valve
CKV-M3 series

Pressure: 0 bar - 17.2 bar
DN: 1.02 mm

... cracking pressure check valve enables free flow in one direction and no (checked) flow in the opposite direction. Due to its low cracking pressure (commonly less than 0.5 psig), leak-tight operation and ...

swing check valve
VC series

DN: 15 mm - 125 mm

Ensures airflow is uni-directional. Lightweight swinging disc design

aluminum check valve
VI

VI SERIES FLOW REVERSING VALVE The “VI” flow reversing valve is used as an accessory for side channel blowers to switch the flow from pressure to negative pressure and vice versa. The flow reversing ...

shuttle check valve
VS

... interference between the selector and the valve body. This product is available with 24VDC or 110V/60 Hz and 220V 50/60hz electrical control or with pneumatic control (0.2 litres per cycle air consumption).The ‘VS’ valve ...

cryogenic check valve
1500 MAGROS

Temperature: -271 °C - 50 °C
Pressure: 40 bar
DN: 6 mm - 100 mm

... springless Non-Return-Valve - Both available for ambient and cryogenic media tempertures: -- ambient valve from -30° C to + 50° C (243 K to 323 K) -- cryogenic valve from ...

membrane check valve
VRNR

Temperature: -20 °C - 80 °C
Pressure: 2 bar - 8 bar

This valve allows the transit of the air only in one way, the valve stops it in the opposite way. They are available with male or female thread, in several dimensions.

ball check valve
VRX

Temperature: -20 °C - 180 °C
Pressure: max 40.0 bar

Stainless steel AISI 316L non-return valves, are designed for harsh usage conditions. The driven shutter and the spring never compressed completely, guarantee very high intervention frequencies.

ball check valve
SR

Temperature: -40 °C - 140 °C
Pressure: 10, 16 bar
DN: 15 mm - 50 mm

The SR check valve allows the passage of fluid in a single direction. • Connection system for weld joints • PN10 valve body made for PP-H injection moulding and European Directive ...

See the other products
FIP - Formatura Iniezione Polimeri
ball check valve
SXE-SSE

Temperature: 0 °C - 100 °C
Pressure: 16 bar
DN: 10 mm - 50 mm

The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded shutter. Easyfit check valves ...

See the other products
FIP - Formatura Iniezione Polimeri
ball check valve
SXE-SSE

Temperature: 0 °C - 100 °C
Pressure: 16 bar
DN: 65 mm - 100 mm

The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded shutter. Easyfit check valves ...

See the other products
FIP - Formatura Iniezione Polimeri
disc check valve
F-2804 series

Temperature: 5 °C - 48 °C
Pressure: 0 psi - 75 psi
DN: 0.063 in

The F-2804 is a series of check valves engineered by Air Logic. It features low "cracking pressures" and a minimal differential for forward flow. The valves can allow flow in only one ...

hydraulic non-return valve
901390

Pressure: 350 bar
DN: 1, 0.5, 0.75 in

Description:: Hydraulic valve for the flow control

See the other products
BEZARES S.A.
hydraulic non-return valve
MC 02

Temperature: 50 °C

See the other products
BEZARES S.A.
hydraulic non-return valve
MPC 02

Temperature: 50 °C

See the other products
BEZARES S.A.