Valves and Fittings
For joining a flanged part to the spigot end of pipes or tubes
Used to connect networks composed of different materials or specially designed for one material, flange adaptors join a flanged part to the spigot end of a pipe or tube. They come in anchoring or non-anchoring versions, while the self-anchoring (locking) products do not necessitate concrete anchor blocks.
Available products
-
UltraQuick flange adaptor
- Very broad tolerance for use with a variety of materials
- Can be fitted to grey cast iron, ductile cast iron and fibre cement pipes as well as to steel or PVC tubes
- Available for continuous lengths of pipe with exterior diameters between DE 49 and 348 mm and a PFA of 16 bar
- Substantial angular deflection at approximately 6°
- Multi-pitch circle flange PN 10 and 16
-
Quick GS, flange adaptor for ductile iron pipes
- Available from DN 60 to DN 200 in the anchoring version and from DN 60 to DN 300 in the non-anchoring version
- PFA of 16 bar for both versions
- Multi-pitch circle flange PN 10 and 16
-
Quick GS, flange adaptor for ductile iron pipes with large diameters
- Available from DN 350 to DN 1000 in a non-anchoring version
- PFA of between 10 and 16 bar
-
Quick PVC automatic anchoring flange adaptor for PVC
- Available from DN 40/DE 40 to DN 200/DE 225 in anchoring and non-anchoring versions
- PFA of 16 bar for both versions
- Multi-pitch circle flange with PN 10 and 16
- A simple or anchored QuickBlutop range exists for possible assembly only on BLUTOP (DE 60 to DE 150 mm) pipes
-
Quick PE mechanical anchoring flange adaptor for PE
- Available from DN 50/DE 63 to DN 400/DE 400
- PFA of 16 bars
- Multi-pitch circle flange with PN 10 and 16
Implementation schema(s)