Flange Adapters for HDPE Pipe

Application: Mining, Water

Working pressure: SDR9, SDR7,SDR11,PN20,PN25,PN16

Size: 315mm, 355mm, 400mm, 450mm, 500mm, 560mm, 630mm, 710mm, 800mm, 900mm, 1000mm, 1200mm, 1600mm, 42”, 48”, 63”

Standard: AS4129, ISO4427, EN12201, F2880, AWWA C906, D2513

For Butt Fusion Welding to HDPE Pipe
Black Butt Fusion Fittings are manufactured and tested to meet ASTM D2513, ASTM D3261 and AWWA C906 regulations. They are compatible for heat butt fusion with black HDPE pipe or fittings manufactured from a like resin, including black HDPE pipe shown on adjacent page. SDR11 rated to 200 PSI @ 73° F. Rated to 140° F. Not for flammable liquids or petroleum based products.

High Density Polyethylene Flange Adapters IPS - 2" to 63"

HDPE Flange Adapter is a cost effective, easy to assemble, mechanical joint intended to connect HDPE pipe to any ASME/ANSI Class 125 or Class 150 flanged piping components without the need for costly fusion equipment. it is compatible with HDPE pipe conforming to ASTM F714, D2447, D3000, or D3035 having wall thicknesses ranging from SDR 32.5 to SDR 7.3.

Each coupling uses two bolts to drive sharply machined teeth into the outside of the HDPE pipe. When the teeth effectively grip into the pipe, it provides a secure and rigid mechanical connection with pressure capabilities exceeding that of the HDPE pipe itself. The banks of teeth are positioned away from the gasket to enhance the coupling’s sealing ability throughout the operating temperature range. As a result, the temperature and pressure capabilities of the Figure 7307 Transition Coupling exceed the highest temperature and pressure ratings of the HDPE pipe. 

Tags: hdpe flange adapter with backup ring | full face flange adaptor | HDPE Electrofusion Fittings | IPS HDPE flange adaptor

butt fusion hdpe flange adaptor for water pipe