Details
Cross Arm Braces
Used to support cross timbers for ropes course, challenge course, zip lines and industrial applications. Have rounded ends and are punched at one end with a 9/16" hole, with a 7/16" hole at the other end. Holes punched 1-inch from brace end to center of hole. Hot dip galvanized.
Flat crossarm braces, used in pairs, are an inexpensive means of aligning and supporting crossarms.
Mounting hole diameters are 7/16" for 3/8" crossarm mounting bolts and 9/16" for pole mounting with 1/2" lag screw or through bolt. Hole centers are 1" from the brace ends, which are rounded for extra safety.
Part No |
Product Name |
Height |
Length |
Width |
Wt (lb) |
|
CROSSARM28 |
1/4 X 1-1/4 X 28" CROSSARM BRACE |
1/4 in |
28 in |
1-1/4 in |
2.52 |
Additional Information
| Country of Manufacture | |
|---|---|
| Manufacturer | Peak |