Exacting Tolerances and Optimum Flatness & Squareness

With our extensive inventory, we’re proud to offer our customers a large variety of aluminum coil alloys and grades.

View Aluminum Coil Sizes

Non-Heat Treatable (Common) Alloys

1100 is commercially pure aluminum (99.00% minimum). Excellent corrosion resistance, workability and weldability; high thermal conductivity. Tensile strength range 14 to 24 KSI. Uses include deep drawing, spinning, sheet metal work, decorative and architectural applications, air ducts, name plates, fan blades, etc. Conforms to AMS QQ-A-250/1 and ASTM B209.

3003 is alloyed with 1.2% manganese to provide a tensile strength range of 17 to 30 KSI. Excellent workability, weldability, and corrosion resistance. Used for drawing, spinning, fuel tanks, sheet metal work and other applications where slightly higher strength than 1100 is required. Conforms to AMS QQ-A-250/2 and ASTM B209.

5005 is alloyed with .8% magnesium. Tensile strength range is 18 to 30 KSI. Excellent workability, weldability, and corrosion resistance. Specified for applications comparable to 1100 and 3003 – where anodizing is required. Anodized finish matches that of architectural alloy 6063. Conforms to Federal specifications ASTM B209.

5052 is alloyed with 2.5% magnesium. Tensile strength range 31 to 44 KSI. Very good corrosion resistance, good workability, weldabilty and strength. Used for aircraft fuel tanks, storm shutters, refrigerator liners, utensils, electronic mounting plates and panels, fan blades, etc. Conforms to AMS QQ-A-250/8 and ASTM B209.

Heat Treatable Alloys

2024 is alloyed with 4.5% copper. Tensile strength range 30 to 63 KSI. Fair workability and corrosion resistance. Forming operations are limited. Used for high strength structural and aircraft applications. Also available as Alclad for improved corrosion resistance. 2024 Conforms to AMS QQ-A-250/4, Alclad AMS QQ-A-250/5 and ASTM B209.

6061 is alloyed with 1.0% magnesium and .6% silicon. Tensile strength range 20 to 42 KSI. Good formability, weldability and corrosion resistance. Used for engineering and structural applications, boats, furniture, transportation equipment, etc. Conforms to AMS QQ-A-250/11 and ASTM B209.

Whatever It Takes

All of Erickson Metals’ employees are empowered to pursue a “Whatever It Takes” philosophy. We support an atmosphere of consistent betterment in communications, creativity, teamwork and mutual respect. By working together, we can develop and maintain partnerships with our customers and suppliers to improve all aspects of business, including efficiency on all levels, excellent responsiveness, and fast turnaround times.

GET A FREE QUOTE