+91 22 6631 3977
navstarsteel@gmail.com
3/5, Sakar Bhavan, Ground Floor,
6th Khetwadi Lane, Mumbai – 400 004, India.
ASME B16.9 Stub End is a metallic product that is a rod with threads on both ends. The ASME B16.9 standard specifies the size of the fitting as ½ inches to 10 inches for seamless products and ½ inches to 48 inches for welded products. Navstar Steel is a leading supplier and manufacturer of the Stainless Steel Long Stub End and short stub end products. These come under the ASME ANSI B16.9, B16.28 and other dimensions.
There are different material grades used to produce these stub ends with different types such as seamless, ERW, welded and fabricated. The DN 15 to DN 1200 types are available. As one of the leading SS Short Stub End Manufacturers, we manufacture the stub ends in various radiuses. The radiuses of the fittings are measured in relation to the outer diameter of the piping that they are used with.
The Stainless Steel Lap Joint Stub End Dimensions vary from the ordinary stub ends as these have lap joints in them. The lap joint presents special connectivity between the stub end and the connected component, mostly pipes. There are different types such as the MSS SP-75 Stub End Type A and Type B. There are different material grades such as 304, 304L and 316L stainless steel grades that are used to create the stub ends. The ASME B16.9 Carbon Steel Stub End Fittings are also in use in various industrial applications. The applications range from domestic, commercial and industrial applications. Please feel free to contact us for information on BS1640 SS Stub End and the prices.
Facing: 125-250 RMS (smooth finish)
welded version = w
= s seamless execution
Nominal | Schedule | D | t | G | F | R. Max. | kg / St. | |
---|---|---|---|---|---|---|---|---|
1/2 “ | 10s | 21.3 | 2.11 | 34.9 | 50.8 | 3.18 | 0.07 | s |
40s | 2.77 | 0.09 | s | |||||
3/4 “ | 10s | 26.7 | 2.11 | 42.9 | 50.8 | 3.18 | 0.10 | s |
40s | 2.87 | 0.12 | s | |||||
1 “ | 10s | 33.4 | 2.77 | 50.8 | 50.8 | 3.18 | 0.16 | s / w |
40s | 3.38 | 0.17 | s | |||||
1 1/4 “ | 10s | 42.2 | 2.77 | 63.5 | 50.8 | 4.76 | 0.22 | s |
40s | 3.56 | 0.25 | s | |||||
1 1/2 “ | 10s | 48.3 | 2.77 | 73.0 | 50.8 | 6.35 | 0.25 | s / w |
40s | 3.68 | 0.31 | s | |||||
2 “ | 10s | 60.3 | 2.77 | 92.1 | 63.5 | 7.94 | 0.43 | s / w |
40s | 3.91 | 0.61 | s | |||||
2 1/2 “ | 10s | 73.0 | 3.05 | 104.8 | 63.5 | 7.94 | 0.57 | s / w |
40s | 5.16 | 0.80 | s | |||||
3 “ | 10s | 88.9 | 3.05 | 127.0 | 63.5 | 9.53 | 0.73 | s / w |
40s | 5.49 | 1.13 | s | |||||
4 “ | 10s | 114.3 | 3.05 | 157.2 | 76.2 | 11.11 | 1.09 | s / w |
40s | 6.02 | 1.87 | s | |||||
5 “ | 10s | 141.3 | 3.40 | 185.7 | 76.2 | 11.11 | 1.47 | s / w |
40s | 6.55 | 2.28 | s | |||||
6 “ | 10s | 168.3 | 3.40 | 215.9 | 88.9 | 12.70 | 2.15 | s / w |
40s | 7.11 | 3.57 | s / w | |||||
8 “ | 10s | 219.1 | 3.76 | 269.9 | 101.6 | 12.70 | 3.22 | s / w |
40s | 8.18 | 6.07 | s / w | |||||
10 “ | 10s | 273.1 | 4.19 | 323.9 | 127.0 | 12.70 | 5.13 | w |
40s | 9.27 | 10.07 | w | |||||
12 “ | 10s | 323.9 | 4.57 | 381.0 | 152.4 | 12.70 | 8.16 | w |
40s | 9.53 | 14.29 | w | |||||
14 “ | 10s | 355.6 | 4.78 | 412.8 | 152.4 | 12.70 | 10.89 | w |
40s | 9.53 | 17.15 | w | |||||
16 “ | 10s | 406.4 | 4.78 | 469.9 | 152.4 | 12.70 | 12.70 | w |
40s | 9.53 | 20.41 | w | |||||
18 “ | 10s | 457.2 | 4.78 | 533.4 | 152.4 | 12.70 | 17.24 | w |
20 “ | 10s | 508.0 | 5.54 | 584.2 | 152.4 | 12.70 | 21.77 | w |
24 “ | 10s | 609.6 | 6.35 | 692.2 | 152.4 | 12.70 | 27.22 | w |
NPS inches |
STUB End | |||
---|---|---|---|---|
Sch. 5S |
Sch. 10S |
Sch. 40S |
Sch. 80S |
|
1/2 | 0.06 | 0.08 | 0.12 | 0.13 |
3/4 | 0.07 | 0.09 | 0.15 | 0.17 |
1 | 0.09 | 0.15 | 0.20 | 0.25 |
1 1/4 | 0.13 | 0.20 | 0.30 | 0.35 |
1 1/2 | 0.16 | 0.25 | 0.38 | 0.46 |
2 | 0.25 | 0.40 | 0.55 | 0.75 |
2 1/2 | 0.35 | 0.50 | 0.80 | 1.00 |
3 | 0.50 | 0.60 | 1.10 | 1.50 |
4 | 0.70 | 1.00 | 1.80 | 2.50 |
5 | 1.00 | 1.25 | 2.50 | 3.50 |
6 | 1.60 | 1.95 | 3.70 | 5.50 |
8 | 2.50 | 3.10 | 5.90 | 10.0 |
10 | 4.00 | 4.90 | 10.5 | 14.0 |
12 | 6.60 | 7.10 | 15.0 | 20.0 |
14 | 6.40 | 7.80 | 15.5 | 20.5 |
16 | 7.90 | 9.00 | 18.0 | 24.0 |
18 | 9.30 | 10.5 | 21.0 | 28.0 |
20 | 12.0 | 13.5 | 23.5 | 31.0 |
24 | 16.5 | 19.0 | 28.5 | 38.0 |
Nominal Pipe Size | 1/2 up to 2½ | 3 to 3½ | 4 | 5 to 8 | 10 to 18 | 20 to 24 |
Outside Diameter at Welding End (OD) | 0.8 | 0.8 | 0.8 | + 1.6 - 0.8 |
+ 2.29 - 0.76 |
+ 3.05 - 0.76 |
Overall Length (F) | 1.6 | 1.6 | 1.6 | 1.6 | 2 | 2 |
Outside Diameter of Lap (G) | + 0 - 0.76 |
+ 0 - 0.76 |
+ 0 - 0.76 |
+ 0 - 0.76 |
+ 0 - 1.6 |
+ 0 - 1.6 |
Thickness of Lap (T) | + 1.52 - 0 |
+ 1.52 - 0 |
+ 1.52 - 0 |
+ 1.52 - 0 |
+ 1.52 - 0 |
+ 1.52 - 0 |
Fillet Radius of Lap (R) | + 0 - 0.76 |
+ 0 - 0.76 |
+ 0 - 1.6 |
+ 0 - 1.6 |
+ 0 - 1.6 |
+ 0 - 1.6 |
Wall Thickness (t) | Not less than 87.5% of Nominal Wall Thickness |
ASME: | ANSI B16.9, ANSI B16.28, MSS-SP-43 |
---|---|
DIN: | DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 |
EN: | EN10253-1, EN10253-2 |
ASTM A403 – ASME SA403 | Standard Specification for Wrought Austenitic SS Piping Fittings |
---|---|
ASME B16.9 | Factory-Made Fittings Buttwelding |
ASME B16.25 | SS Buttwelding End |
ASME B16.28 | Wrought Steel SR Elbows and Buttwelding Returns |
MSS SP-43 | Fabricated and Wrought Butt-Welding Fittings for Corrosion Resistant, Low Pressure |
Short stub Ends Sch 80 2 IN, ANSI B16.9, 140mm, Stainles Steel stub Ends
ASME B16.9 stub Ends SCH 10 ANSI B16.9, 6 Inch, SCH 10S, Stainless Steel 316 stub Ends
ASME B16.9 Lap Joint stub Ends A403 WP304 stub Ends, BW, SCH 40S, Beveled Ends, 6 Inch
Mss Type B stub Ends 1 1/2 Inch, SCH 10S, ASTM A403 WP316 stub Ends, RF
Long Stub Ends SCH 40 SCH 10S, MSS SP-43, ASTM A403 TP904L Stub Ends, 3 Inch Short stub Ends Sch 80 Short stub Ends Sch 80 2 IN, ANSI B16.9, 140mm,
Buttweld stub Ends Fittings A403 WP304L, 2-1/2 Inch, Stainless Steel stub Ends, SCH 40S
Stub Ends Din 2642 SS 304 stub Ends, ANSI B16.9, 6 Inch, SCH 10S
ANSI B16.9 stub Ends Type A Steel stub Ends Pipe Fittings
A403 Gr WP304 stub Ends EN 1092-1 Type 35
Carbon Steel stub Ends Fittings
A234 Gr WPB stub Ends EN 1092-1 Type 36
Stainless Steel stub Ends Pipe Fittings
Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
---|---|
Sizes | 1/2″NB TO 36 “NB IN |
Schedule Wall Thickness | 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS Schedule |
Types | Long Stub Ends, Pipe Stub Ends, Butt weld Long Stub Ends, Lap Joint Stub Ends. |
Steel Grades | Alloy Steel, Stainless Steel, Duplex, Carbon Steel, Nickel Alloys, Cupro Nickel |
Value Added Services | Electro Polish, Hot Dipped Galvanizing, Epoxy & FBE Coating, Sand Blasting, Threading, Soldering |
Nominal Pipe Size (NPS) | Outside Diameter at Bevel | Long Pattern | Short Pattern | Radius of Fillet | Diameter of Lap | |
---|---|---|---|---|---|---|
Max | Min | F | F | R | G | |
1/2 | 22.8 | 20.5 | 76 | 51 | 3 | 35 |
3/4 | 28.1 | 25.9 | 76 | 51 | 3 | 43 |
1 | 35.0 | 32.6 | 102 | 51 | 3 | 51 |
1-1/4 | 43.6 | 41.4 | 102 | 51 | 5 | 64 |
1-1/2 | 49.9 | 47.5 | 102 | 51 | 6 | 73 |
2 | 62.4 | 59.5 | 152 | 64 | 8 | 92 |
2-1/2 | 75.3 | 72.2 | 152 | 64 | 8 | 105 |
3 | 91.3 | 88.1 | 152 | 64 | 10 | 127 |
3-1/2 | 104.0 | 100.8 | 152 | 76 | 10 | 140 |
4 | 116.7 | 113.5 | 152 | 76 | 11 | 157 |
5 | 144.3 | 140.5 | 203 | 76 | 11 | 186 |
6 | 171.3 | 167.5 | 203 | 89 | 13 | 216 |
8 | 222.1 | 218.3 | 203 | 102 | 13 | 270 |
10 | 277.2 | 272.3 | 254 | 127 | 13 | 324 |
12 | 328.0 | 323.1 | 254 | 152 | 13 | 381 |
14 | 359.5 | 354.8 | 305 | 152 | 13 | 413 |
16 | 411.0 | 405.6 | 305 | 152 | 13 | 470 |
18 | 462 | 456 | 305 | 152 | 13 | 533 |
20 | 514 | 507 | 305 | 152 | 13 | 584 |
22 | 565 | 558 | 305 | 152 | 13 | 641 |
24 | 616 | 609 | 305 | 152 | 13 | 692 |
Product | Nom. Pipe Size | Dia (G) | Length (F), Short | Outside Dia (O.D.) | Sch 160, Inside Dia (I.D.) | Sch 160, Lap Thickness (t) | Schedule 160, Wall Thickness (T) | XX Strong Wall Approx. Weight | XX Strong Wall, Inside Dia (I.D.) |
---|---|---|---|---|---|---|---|---|---|
1 1/2″ Stub Ends Long Type “A | 1.5 | 2.875 | 2 | 1.9 | 1.338 | 0.281 | 0.281 | 2.98 | 1.1 |
1 1/2″ Stub Ends Long Type “A” | 1.5 | 2.875 | 4 | 1.9 | 0.15 | 0.15 | 1.49 | 1.5 | 0.2 |
1 1/4″ Stub Ends Long Type “A | 1.25 | 2.5 | 2 | 1.66 | 1.16 | 0.25 | 0.25 | 2.52 | 0.896 |
1 1/4″ Stub Ends Long Types “A” | 1.25 | 2.5 | 4 | 1.66 | 0.14 | 0.14 | 1.26 | 1.278 | 0.191 |
1″ Stub Ends Long Types “A | 1 | 2 | 2 | 1.315 | 0.815 | 0.25 | 0.25 | 1.76 | 0.599 |
1″ Stub Ends Long Types “A” | 1 | 2 | 4 | 1.315 | 0.133 | 0.133 | 0.88 | 0.957 | 0.179 |
1/2″ Stub Ends Long Types “A | 0.5 | 1.375 | 2 | 0.84 | 0.464 | 0.187 | 0.188 | 0.68 | 0.252 |
1/2″ Stubs Ends Long Types “A” | 0.5 | 1.375 | 3 | 0.84 | 0.109 | 0.109 | 0.34 | 0.546 | 0.147 |
10″ Stubs Ends Long Types “A | 10 | 12.75 | 5 | 10.75 | 8.5 | 1.125 | 1.125 | – | – |
10″ Stubs Ends Long Types “A” | 10 | 12.75 | 10 | 10.75 | 0.365 | 0.365 | 54 | 9.75 | 0.5 |
12″ Stubs Ends Long Types “A | 12 | 15 | 6 | 12.75 | 10.126 | 1.312 | 1.312 | – | – |
12″ Stubs Ends Long Types “A” | 12 | 15 | 10 | 12.75 | 0.375 | 0.375 | 64.5 | 11.75 | 0.5 |
14″ Stubs Ends Long Types “A” | 14 | 16.25 | 12 | 14 | 0.375 | 0.375 | 84 | 13 | 0.5 |
16″ Stubs Ends Long Types “A” | 16 | 18.5 | 12 | 16 | 0.375 | 0.375 | 98 | 15 | 0.5 |
18″ Stubs Ends Long Types “A” | 18 | 21 | 12 | 18 | 0.375 | 0.375 | 136 | 17 | 0.5 |
2 1/2″ Stubs Ends Long Types “A | 2.5 | 4.125 | 2.5 | 2.875 | 2.125 | 0.375 | 0.375 | 8.8 | 1.771 |
2 1/2″ Stubs Ends Long Types “A” | 2.5 | 4.125 | 6 | 2.875 | 0.203 | 0.203 | 4.4 | 2.323 | 0.276 |
2″ Stubs Ends Long Types “A | 2 | 3.625 | 2.5 | 2.375 | 1.689 | 0.343 | 0.343 | 6.1 | 1.503 |
2″ Stubs Ends Long Types “A” | 2 | 3.625 | 6 | 2.375 | 0.154 | 0.154 | 3.05 | 1.939 | 0.218 |
20″ Stubs Ends Long Types “A” | 20 | 23 | 12 | 20 | 0.375 | 0.375 | 157 | 19 | 0.5 |
3 1/2″ Stubs Ends Long Types “A | 3.5 | 5.5 | 3 | 4 | – | – | – | 15.5 | 2.728 |
3 1/2″ Stubs Ends Long Types “A” | 3.5 | 5.5 | 6 | 4 | 0.226 | 0.226 | 7.75 | 3.364 | 0.318 |
3″ Stubs Ends Long Types “A | 3 | 5 | 2.5 | 3.5 | 2.624 | 0.438 | 0.438 | 9.8 | 2.3 |
3″ Stubs Ends Long Types “A” | 3 | 5 | 6 | 3.5 | 0.216 | 0.216 | 6.5 | 2.9 | 0.3 |
3/4″ Stubs Ends Long Types “A | 0.75 | 1.688 | 2 | 1.05 | 0.612 | 0.218 | 0.219 | 0.94 | 0.434 |
3/4″ Stubs Ends Long Types “A” | 0.75 | 1.688 | 3 | 1.05 | 0.113 | 0.113 | 0.47 | 0.742 | 0.154 |
4″ Stubs Ends Long Types “A | 4 | 6.188 | 3 | 4.5 | 3.438 | 0.531 | 0.531 | 19.3 | 3.152 |
4″ Stubs Ends Long Types “A” | 4 | 6.188 | 6 | 4.5 | 0.237 | 0.237 | 9.65 | 3.826 | 0.337 |
5″ Stubs Ends Long Types “A | 5 | 7.313 | 3 | 5.563 | 4.313 | 0.625 | 0.625 | 32.66 | 4.063 |
5″ Stubs Ends Long Types “A” | 5 | 7.313 | 8 | 5.563 | 0.258 | 0.258 | 16.33 | 4.813 | 0.375 |
6″ Stubs Ends Long Types “A | 6 | 8.5 | 3.5 | 6.625 | 5.187 | 0.718 | 0.719 | 45.26 | 4.897 |
6″ Stubs Ends Long Types “A” | 6 | 8.5 | 8 | 6.625 | 0.28 | 0.28 | 22.63 | 5.761 | 0.432 |
8″ Stubs Ends Long Types “A | 8 | 10.625 | 4 | 8.625 | 6.813 | 0.906 | 0.906 | 59.71 | 6.875 |
8″ Stubs Ends Long Types “A” | 8 | 10.625 | 8 | 8.625 | 0.322 | 0.322 | 34.12 | 7.625 | 0.5 |
Product | Nom. Pipe Size | Diameter (G) | Length (J) | Outside Diameter (O.D.) | Schedule 5S Approx. Weight | Schedule 5S, Inside Diameter (I.D.) | Schedule 5S, Wall Thickness (T) |
---|---|---|---|---|---|---|---|
1 1/2″ Short Stubs Ends Short Type “C” | 1.5 | 2.875 | 2 | 1.9 | 0.29 | 1.77 | 0.065 |
1 1/4″ Short Stubs Ends Short Type “C” | 1.25 | 2.5 | 2 | 1.66 | 0.21 | 1.53 | 0.065 |
1″ Short Stubs Ends Short Type “C” | 1 | 2 | 2 | 1.315 | 0.19 | 1.185 | 0.065 |
1/2″ Short Stubs Ends Short Type “C” | 0.5 | 1.375 | 2 | 0.84 | 0.13 | 0.71 | 0.065 |
10″ Short Stubs Ends Short Type “C” | 10 | 12.75 | 5 | 10.75 | 7.48 | 10.482 | 0.134 |
12″ Short Stubs Ends Short Type “C” | 12 | 15 | 6 | 12.75 | 15 | 12.438 | 0.156 |
14″ Short Stubs Ends Short Type “C” | 14 | 16.25 | 6 | 14 | 19.2 | 13.688 | 0.156 |
16″ Short Stubs Ends Short Type “C” | 16 | 18.5 | 6 | 16 | 23.9 | 15.67 | 0.165 |
18″ Short Stubs Ends Short Type “C” | 18 | 21 | 6 | 18 | 28.5 | 17.67 | 0.165 |
2 1/2″ Short Stubs Ends Short Type “C” | 2.5 | 4.125 | 2.5 | 2.875 | 0.75 | 2.709 | 0.083 |
2″ Short Stubs Ends Short Type “C” | 2 | 3.625 | 2.5 | 2.375 | 0.44 | 2.245 | 0.065 |
20″ Short Stubs End Short Type “C” | 20 | 23 | 6 | 20 | 36.3 | 19.624 | 0.188 |
24″ Short Stubs Ends Short Type “C” | 24 | 27.25 | 6 | 24 | 56 | 23.564 | 0.218 |
3″ Short Stubs End Short Type “C” | 3 | 5 | 2.5 | 3.5 | 0.94 | 3.334 | 0.083 |
3/4″ Short Stubs Ends Short Type “C” | 0.75 | 1.688 | 2 | 1.05 | 0.14 | 0.92 | 0.065 |
4″ Short Stubs End Short Type “C” | 4 | 6.188 | 3 | 4.5 | 1.38 | 4.334 | 0.083 |
5″ Short Stubs Ends Short Type “C” | 5 | 7.313 | 3 | 5.563 | 2.06 | 5.345 | 0.109 |
6″ Short Stub End Short Type “C” | 6 | 8.5 | 3.5 | 6.625 | 2.75 | 6.407 | 0.109 |
8″ Short Stub End Short Type “C” | 8 | 10.625 | 4 | 8.625 | 3.88 | 8.407 | 0.109 |
Stubs End type | Stubs End Price in India | Stubs End Price in UAE Dirham |
---|---|---|
ASTM A403 WP 304 B16.9 BW R=1.5D, SCH-40S, 15mm | INR 85.38 / Kg | AED 4.50 UAE Dirham |
ASTM A234 GR. WPB B16.9 BW R=1.5D, SCH-40, 25mm | INR 50.00 / Kg | AED 2.17 UAE Dirham |
ASTM A403 WP 304 B16.9 BW R=1.5D, SCH-40S, 40mm | INR 235.25 / Kg | AED 12.12 UAE Dirham |