Reducing Flange Dimensions
Reducing slip on flange has an inside diameter to weld to an 6 pipe with bolt hole mounting pattern to fit an 10 pipe flange.
Pipe flange bolt hole pattern: ANSI, 150# flange
Pipe flange Inside Diameter (ID): 12.88
Pipe flange Outside Diameter (OD): 23.5
Pipe flange Bolt Hole Center Diameter: 21.25
Pipe flange Bolt Hole Diameter: 1.13
Pipe flange Number of Bolt Holes: 16
Pipe flange thickness: .5
Pipe flange ship weight: 40.9 lbs
Material: Carbon steel flange
Flange style: Plate flange, flat face flange, ring flange, weld flange or slip on flange
These pipe flanges have a phonographic finish face to provide excellent adhesion with gasket during installation. This steel pipe flange is coated with a light weight oil for rust prevention.
This reducing flange welds to all 12 schedule pipe sizes. The two size reducing flange is also referred as a ring flange, weld flange, back up flange or slip on reducing flange. Reducing slip on flanges are used to transition from one pipe flange size to the next pipe flange size. Reducing flanges are also available to transition to one pipe flange sizes, for example a 8 pipe flange to a 10 pipe flange. At top of this page, click Plate Flanges and select One Size Reduction Flanges - Carbon Steel.
Check stock status below. Most reducing flanges are in stock and ship within 48 hours.