Ductile Iron Pipe Centrifugal Casting Mold

Ductile Iron Pipe Centrifugal Casting Mold

Mold Technical Specifications
Quality Material: 21CrMo10
Chemical Compositions: C: 0.16-0.22%; Si: 0.20-0.40%; Mn: 0.20-0.40%; Cr: 2.30-2.60%; Mo: 0.30-0.40%; P: 0.015%max; S: 0.010%max.
Mechanical Properties: All molds to be forged in single piece, no welding.
Hardness: BHN=220-260
Tensile Strength: MPa: min.750
Yield Strength: MPa: min.650
Impact Strength: 180 akJ min.
Elongation: 15% min.
Reduction Area: 50% min.
Heat Treatment: Hardened and fully tempered
Inside Taper: Will be in steps
Surface Condition: Finishing Machining without honing
(Inside: 1.6-3.2 Ra, Outside: 3.2-6.3 Ra)
Radial Runout Tolerance: 0.15mm
 

Ductile Iron Pipe Centrifugal Casting Mold Machining 1
Ductile Iron Pipe Centrifugal Casting Mold Machining
Ductile Iron Pipe Centrifugal Casting Mold
Ductile Iron Pipe Centrifugal Casting Molds
Centrifugal Casting Mold Machining 2
Hot Centrifugal Casting Mold
Ductile Iron Pipe Centrifugal Casting Mold Machining 2
Ductile Iron Pipe Centrifugal Casting Mold Machining 3
Ductile Iron Pipe Centrifugal Casting Mold 1
Ductile Iron Pipe Centrifugal Casting Mold 2
Ductile Iron Pipe Centrifugal Casting Mold 3
Ductile Iron Pipe Centrifugal Casting Mold 4